Hinge Slow – Motion...

Price for Set of 2 Pcs.
Unique built in damping system allows shutter to close in slow motion without banging.
Special cover plate provided.
Available in Full overlay, Half overlay & Inset.
Max. opening 105°
Max. Shutter size : 34” x 22” (850 mm x 550 mm) for 2 hinges
Shutter Thickness: 16mm to 19mm.
Shutter cavity: Ø35 mm, 12 deep, cavity 4 mm from edge.
Finish: Nickel Plated

Ask a Question

SKU: 12607 Category: Uncategorized

Description

SPECIFICATIONS

Model	Code	Type	Size	‘A’ mm	Finish
Hinge Slow-Motion Overlay	HSM 1	Full Overlay	ø 35 mm	36	Nickel Plated
Hinge Slow-Motion Half Overlay	HSM 2	Half Overlay	ø 35 mm	40
Hinge Slow-Motion Inset	HSM 3	Inset	ø 35 mm	58

FITTING INSTRUCTIONS

Drill out the cavity in the shutter as per the dimensions in Fig. 1. Use ‘Ebco’ Drilling jig. Do not chisel.
Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
Make hole in the cabinet for mounting plate as per Fig. 2 and screw on the mounting plate.
Now, align the shutter with the cabinet and click-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.