Description
SPECIFICATIONS
Code Nos. | Model | ‘A’ mm | Finish |
HC1(I) | Full Overlay | 36.0 | Nickel Plated |
HC2(I) | Half Overlay | 36.0 | |
HC3(I) | Inset | 56.0 |
FITTING INSTRUCTIONS
- Drill out the cavity in the shutter as per the dimensions in Fig.1. Use ‘ebco’ Drilling jig. Do not chisel.
- Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
- Mark hole in the cabinet for mounting plate as per Fig.2 and screw on the mounting plate.
- Now, align the shutter with the cabinet and click-on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
- By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
![Ebco Click On Hinge I](https://ebco.in/image/data/Click On Hinge I/ebco-3click-on-hinge-i-spec-1.jpg)
![Ebco Click On Hinge I](https://ebco.in/image/data/Click On Hinge I/ebco-3click-on-hinge-i-fitting-2.jpg)
![Ebco Click On Hinge I](https://ebco.in/image/data/Click On Hinge I/ebco-3click-on-hinge-i-fitting-1.jpg)
![Ebco Click On Hinge I](https://ebco.in/image/data/Click On Hinge I/ebco-3click-on-hinge-i-spec-2.jpg)
Reviews
There are no reviews yet.